Although I don't know how the deviation of the photovoltaic bracket is produced, it is certain that it will have different degrees of impact on the direct use of photovoltaics, so we must find a way to solve this problem. As a company specializing in the production of photovoltaic stents, you can share any experience in this regard.
The processing method of the deviation of the photovoltaic support should be carried out according to different performance. When the photovoltaic support bolt is deformed, it can be knocked with a sledgehammer, and the steel plate is welded firmly after the correction, the purpose is to play the role of processing. If the deviation is manifested in the bolt spacing, then it must be hit with an oxyacetylene flame to bake it red, and the steel plate must also be welded to the middle part.
Another situation is that the bolts on the photovoltaic bracket have a large deviation. Because they are large-diameter bolts, they need to be cut first and then the steel plates are welded to avoid further expansion of the deviation.
