Photovoltaic brackets are used to support solar photovoltaic equipment, so they need to have strong load-bearing capacity and stability, but it is difficult to do so by the bracket alone, and some auxiliary accessories are required. Clamps are one of them. . Then the key we want to talk about is the pressing block of the bracket, so as to make the product perform better.
There are many different models of stent products, so that the pressure blocks used are also different. There are mainly two products of side pressure blocks and medium pressure blocks. The side pressing block is mainly used to fix the main part of the photovoltaic bracket and the guide rail, so that the two parts are integrated, and its stability. The position of the side pressing block is generally between the peripheral main part and the guide rail, which is also the reason why it is called the side pressing block.
The medium pressure block is used to fix the main part and the main part, so that they are connected, and indirectly can also be connected with the guide rail, so that the whole can be connected into a stable whole. The robustness of the product can be imagined, and the photovoltaic device on it will not affect it at all.
